NCM MILANO PLUS TREKKING E-BIKE, CITY-BIKE, 250W, 48V 16AH 768WH BATTERY
Inspired by the Fashion Capital of Europe the NCM Milano + is designed to ride as elegant as it looks. This E-bike is designed with a tough aluminium frame, and an adjustable handlebar/stem setup, with a sprung seat post for improved comfort. The low top tube, makes the bike sturdy and strong yet comfortable and easy to mount whilst providing additional protection to the battery.
- Ergonomic bicycle Grips
- Comfortable sitting posture
- All important controls easily accessible
- Supplied with 48V to deliver a high output power
- over 768Wh capacity for a longer distance
- reach up to 150 km (depending on the conditions)
- easily removable battery so you can charge it anywhere
- A built-in USB port with 5V to charge mobile phones
Motor: Das-Kit X15 motor, 48V 250W, max speed 25 km/h
Battery: DEHAWK i5-4816P, 768Wh, 48v 16Ah, Panasonic, with USB Port
Display: Das-Kit C7, LCD Display
Charger: DC483DE 48V 3A
Frame: Alu. 6061, 457/480MM
Forks: SUNTOUR NEX 63mm
Braking System: Tektro Hydraulic Disc
Gear Selector: Shimano Acere M360, 8 speed
Front Derailleur: N/A
Rear derailleur: Shimano Acere M360, 8 speed
Saddle: Selle Royal Gel Saddle, Brown
Tyre: Shwalbe Marathon, 26×1.75 28×1.5
Handle Grips: Velo, Brown Leather
Pedal: Wellgo, B087
Range: Up to 150 km
Weight: 27 kg
- 1 year warranty on all electronic parts (including battery, motor, controller, display, lights)
- 2 year warranty on the bike frame
- Apart from manufacture defects that could be present, parts that wear due to normal use (such as tires, brake pads, chains, spokes, freewheel, tire puncture etc) are not included in the warranty but maybe replaced on a case by case basis within the first 6 months.
Our bikes are water resistant but not waterproof. Water damage is not covered under warranty.
In order to ensure our high-quality standard, our bicycles are subjected to a functional test at the factory. This can lead to dust deposits on the tyres and the seat post. Our bikes are only delivered pre-assembled, a final fine adjustment and inspection by the buyer or a third party are necessary (costs incurred for this cannot be covered). Before riding, please check all screws for strength and carry out a fine adjustment of the gears and brakes. Check the tyre pressure. Depending on the bicycle model, the final assembly and inspection of the components should take between 60 and 90 minutes.
The laws around the use of scooters/e-bikes on public lands, roads and areas vary from state to state.
We recommend you always check your local council and road traffic laws prior to using a scooter/e-bike to ensure you are aware of any restrictions that may affect the use of motorised vehicles.
Always use appropriate protective riding equipment such as an approved helmet and suitable clothing.